Tips &amp; Tricks

Reducing L:D Ratio Provides Improvements

Reducing the L:D ratio provides an improvement in speed which then provides longer tool life, better surface finish and size control of the bore.

Kategorien

Lubrication Intervals for Fine Boring Heads

To ensure reliable performance, find out how often should you lubricate your fine boring head.

Kategorien

Ground Chip-breakers vs. Molded Chip-breakers

Ground chip-breaker and molded chip-breaker

When it comes to boring operations, learn when to use a ground chip-breaker vs. a molded chip-breaker.

Kategorien

EWE Heads Shipping with Plastic Battery Tab

The EWE digital boring heads now ship with a plastic battery tab to prevent the head from turning on during shipping.

Kategorien

How to Find Minimum Insertion Depth

The is no general rule to cutting tool shank insertion as a multiplier for shank diameter. All tool holder types have different requirements.

Kategorien

What is BBT and BCV?

Sometimes our customers see our tool holder catalog numbers and ask us, "What is BBT and BCV?" Great question!

Kategorien

Rough Boring vs. Finish Boring

BIG KAISER Twin Cutter Rough Boring Head

There’s more than one way to finish a hole. The most effective option will depend on the number of parts, acceptable cycle time and tolerance callouts.

Kategorien

Part Size Doesn't Matter for UNILOCK Workholding

No part or fixture is too small or too big for UNILOCK. The only limit is your imagination.

Kategorien

Aufspannzubehör

Use MEGA Chucks to Increase Your Tool Life

As cutting tool diameters get smaller, the acceptable amount of runout must decrease substantially.

Kategorien

Is Boring Faster than Reaming?

When making holes it can be difficult to decide between reaming or boring. Which way is actually faster?

Kategorien

Back Boring with Series 310 Boring Heads

Insert holders on most Series 310 boring heads can be mounted upside down to perform precision back boring operations.

Kategorien

Download 2D and 3D Tool Data with this Online Tool

Did you know you can download 2D and 3D tool data with our Manuals, DXF and Step Search online tool? It is as easy as searching for a catalog number.

Kategorien

Eigenschaften

Allgemeines Interesse

Precision Micro End Mills Catalog

Did you know we have a stand-alone catalog containing 14 precision micro end mill geometries?

Kategorien

Tool Holders that Maintain Runout Accuracy When It Matters

Hydraulic chucks are an excellent choice for high accuracy applications due to their ability to maintain runout accuracy over an extended period of time.

Kategorien

Why Does My Digital Boring Head Display Read Accu?

EWD/EWE digital boring head displaying "Accu"

This message does not mean there is an error or accuracy malfunction with the boring head.

Kategorien

Demystifying Insert Nose Radius Selection

Even among experienced machinists, choosing the right insert for boring a hole remains a difficult process that is fraught with myth and misconception. However, it is no myth that insert selection can completely save or kill performance on an application.

Kategorien

How to Improve Cycle Time When Creating Wire EDM Starter Holes

Coated carbide micro deep hole drills manufactured by SPHINX Tools can reliably create wire EDM starter holes up to 5x faster than traditional wire erosion techniques.

Kategorien

Digital Boring Head Backlash?

It is wrong to make diameter adjustments to the 112 Series EWD/EWE digital boring heads without having a boring bar clamped.

Kategorien

Get the Most Out of Your Tool Holders

Overall gripping strength increases as you increase the size of your tool holders (when looking at the same type of holder).

Kategorien

Correct Clamping of Mechanical Milling Chucks

BIG-PLUS® CAT Hi-Power Milling Chuck Slim

When using a mechanical milling chuck that implements a needle bearing cage the correct clamping position will vary.

Kategorien

Diameter Adjustments on Digital Boring Heads

Do not make diameter adjustments on EWD/EWE digital boring heads unless a boring bar is clamped in the boring head.

Kategorien

Coolant & High Performance Drills

When using a high-performance drill, we do not recommend turning on coolant until the drill is inside a 1-2xD deep pilot hole.

Kategorien

Use Air to Maintain Your Loading System

To maintain a highly repeatable loading system, use air to clean the clamping knobs.

Kategorien

Aufspannzubehör

Cleaning is Key to Runout Control

Cleanliness is key to achieving good runout control when assembling tool holders. Small particles or oil in a tool holder can cause large runout of the cutting tool, deceasing tool life and performance.

Kategorien

Zubehör

Drill Reamers Suitable for Tight Tolerance Holes Requiring Excellent Surface Finish

Did you know Sphinx offers 3 unique drill/reamer geometries capable of drilling from a solid while achieving H7-H9 hole tolerance with exceptionally good surface finish?

Kategorien