BIG DAISHOWA News

BIG DAISHOWA has introduced the C3 program, an expansion of the BIG CAPTO tool holder line, designed to increase efficiency and precision for small lathes.

BIG DAISHOWA has announces addition to the MEGA DOUBLE POWER CHUCK lineup for heavy-duty end milling.

BIG KAISER has expanded its lineup of Smart Damper-equipped, arbor-style face mill holders.

The hydraulic chucks for Swiss lathes offering has expanded to include inch-size standard chucks, as well as new F Type and R Type chucks.

Bicycles are one of the oldest modes of transportation, but that doesn’t mean they haven’t evolved with the times.

Balancing, taper contact, and accuracy are critical factors when selecting a high-speed tool holder for medical applications.

A lot of conflicting information has circulated about balancing tools over the years. Let's clear some things up and make life a little easier for you.

Otto Martin Maschinenbau GmbH & Co. KG has been manufacturing woodworking machinery since 1922. They know a thing or two about precision tools.

Micromachining, cutting where the volume of chips produced with each tool path is very small, is not a high-speed operation in relation to chip load per tooth. Rather, it involves a high spindle speed due to cutter diameter. The part may be physically larger, but details of the part require ultra-small profiles achieved only by micromachining. In other words, micromachining is not limited in scope to only miniature parts.

BIG KAISER expands jet-through hydraulic chuck line to include the BCV interface and additional inch sizes.

Machine maintenance is critical to metalcutting. Because of their manual nature, certain tasks can be hard and time-consuming.

Shrink-fit and hydraulic holders are both useful in low clearance, tight work envelopes found in moldmaking and multi-axis machining applications. When deciding which one to use, their differences will guide your choice. Here are some of the fundamental contrasts to help you decide which holder type is best for your work.

To make their cars as light and aerodynamic as possible, Team Penske’s shop performs delicate work milling aluminum, titanium and steel.

Keeping pace with modern manufacturing demands often means bridging the gap between design and production. Creative and resourceful applications of tooling and accessories, such as angle heads, can get complex parts out the door.

BIG KAISER’s MEGA New Baby Chuck is now available up to ø1" clamping for drills, reamers and finishing end mills with .00004" runout accuracy.

When setting up a tapping operation with a collet chuck, consider a new tap holder designed specifically to mitigate the load imposed on the tap by essentially absorbing synchronization error.

BIG KAISER’s Mega ER Grip was designed to outperform all standard ER systems in the four most critical areas of tool holder performance: clamping force, concentricity, rigidity and balance at high spindle speeds.

BIG KAISER announces the introduction of the world’s smallest hydraulic chuck for HSK-E25 machine spindles, thus completing its extensive range of BIG KAISER Super Slim Hydraulic Chucks.

Runout can be fickle, but finding a solution for it can pay significant dividends. How a little wobble can really increase your costs.

While the latest machine tool technology may go a long way towards eliminating vibration and chatter, adding a new one may not be realistic. Luckily, there are less disruptive options that can make positive impacts on vibration without breaking the bank.

BIG KAISER has launched the HMCJ, a super-slim milling chuck with peripheral coolant supply, designed to support heavy-duty and finish end milling tasks with power and precision using Ø1/2” or Ø12mm cutters.

The chances of a tool slipping or pulling out in its holder during work is increasing. Here are some insights to help you select the proper holder for your work.

BIG KAISER introduces the Mega Perfect Grip from BIG Daishowa, a simple to handle, heavy-duty milling chuck for heat resistant super alloys (HRSA) that eliminates end mill pullout under heavy torque loads.

BIG KAISER is introducing the RBX12 Air Power Spindle, a high-speed air-driven spindle that achieves an impressive variable rotational speed of 100,000-120,000 RPM.

If you purchase cheap dual contact tooling after being told by a supplier that it will work just as good as the original you risk unsatisfactory performance.

Moldmakers hoping to avoid problems such as chatter, poor tool life and molds that fail quality control muster need to consider a variety of factors when selecting a long-reach toolholder.

BIG KAISER now offers BIG Daishowa's high precision MEGA ER Grip with modular KAB connection, allowing custom configurations with standard components.

See the benefits of BIG KAISER's premium tooling play out with the new BIG Daishowa Speed Finisher face mill for aluminum or cast iron.

Add flexibility to your machine, increasing productivity by easily changing the angle of the cutter while using the original workpiece setup.

BIG KAISER's HSK-A125 tooling system, for machines such as Makino's T2 and T4 models, is the ideal solution for the aerospace industry – capable of tackling large-scale titanium and other workpieces on massive tables.